COATINGS
Solutions for Every Low-Slope Roof Challenge
Regardless of project size, MHP commercial roofing systems have buildings covered. From fully adhered EPDM systems with Acrylic Water Base Bonding Adhesive to heat-weld membranes, MHP has a solution for every low-slope roof challenge.
Acrylic Coatings
Silicone Coatings
SEBS Coatings
Asphalt/Cement
Acrylic Coatings
Features & Benefits
- Available in multiple standard colors, custom colors available with a lead time
- Apply with spray, roller or brush
- Water base dry time can be affected by temperature and humidity
- Can re-coat in 12 hours
- Up to 10 year warranty available on metal only
- Up to 10 year material only warranty available on multiple substrates
- Do not freeze, do not thin
- Do not store at temperatures below 45 F or in excess of 120 F
Silicone Coatings
Features & Benefits
- Available in multiple standard colors, custom colors available with a lead time
- Apply with spray, roller or brush
- Moisture cure
- Excellent in ponded areas
- Can re-coat in 2-4 hours
- Up to 20 year warranties available on multiple substrates
- Do not freeze, do not thin
- Do not store at temperatures below 45 F or in excess of 120 F
SEBS Coatings
Features & Benefits
- Only available 8 colors
Apply with spray, roller or brush - Can be applied to multiple substrates
- Not recommended over PVC or EPDM
- Solvent base drying time can be affected by temperature or humidity
- Can re-coat in 4-6 hours
- Up to 15 year system warranty available on metal only
Asphalt/Cement
Features & Benefits
- Provides exceptional weathering characteristics over a wide range of challenging conditions temperatures and weather
- Will not mudcrack and will remain highly resilient and durable through all seasons
- Interlocking fiber matrix assures uniform, excellent adhesion
- Exhibits excellent sag resistance when used on vertical surfaces, even at high temperatures
- 100% recycled cellulose fibers
- Positive side damp proofing of concrete, masonry walls and foundations
- NOT RECOMMENDED for use with polymer-modified bitumen (APP, SBS)
- Do not store at temperatures below 45 F or in excess of 120 F